You must be able to hear each microphone properly and pick up on any issues with the audio. The first thing you need to think about when using multiple mics is monitoring.

More than Four Microphones into one 3.5mm Jack Input or USB PortĬonsiderations when Using Multiple Microphones.

Three or Four XLR Microphones to One USB Port.

Three or Four 3.5mm or ¼” Jack Microphones to One 3.5mm Jack Input.

Two XLR Microphones to One 3.5mm Jack Input.

Two 3.5mm Jack Microphones to One 3.5mm Jack Input.

Considerations when Using Multiple Microphones.

However, if you need to connect more mics or output to USB, you may have to consider an audio interface or a mixer.īefore you go off and buy a second, third, or even fourth microphone though, let us first look at what it means to use more than one mic and some of the things you need to think about to avoid it going horribly wrong. If you only need to connect two 3.5mm microphones to one 3.5mm input, a simple splitter cable configured to output one mic on the left channel and one mic on the right would suffice. In this article, we’ll explore the different ways of connecting multiple microphones to a single input source, whether that be a digital recording device or a computer.īy the end, you’ll have a good understanding of what kit you might need for a suitable setup. There are different ways to connect all this, but the aim should always be to achieve the best quality audio and where possible to have each mic on a separate track which will make editing much easier. The additional microphones could be for your guest(s), a co-host, or people involved in a panel discussion. Unless you’re a solo podcaster, you’ll need to record with more than one microphone. Please assume all links on this page are affiliate links. As an Amazon Associate we earn from qualifying purchases when you use one of our links. Affiliate Disclosure: The Seasoned Podcaster is supported by its readers.

Audio mixer multiple outputs